Laminate flooring is different from other types of flooring, the major difference lies in the fact that laminate floors are made from engineered wood. This, in other words, is to say that the type of wood used for laminate flooring is not as hard as original wood. Installing it thus calls for a lot of precaution, otherwise, you might end up with loosely fitting bits and pieces here and there. The best bit with this kind of flooring is that, it comes with a manual when you buy it from authorized dealers.
When you buy the laminate flooring, the first thing you need to do is to calculate the area that needs to be covered. You do not want to end up with more pieces of wood than you needed, neither do you want to have patches of laminate wood and hard wood in the same room. The two kinds of wood may not do well close to each other because the treatment for each of them is different. For example, during installation, the hardwood requires that you first leave it for some time after you have opened it.
This allows it to get accustomed to the room temperatures. As for the laminate wood, you are required to install it as soon as you open it. Hardwood may also require a lot of care to make it last long, while laminate wood is just made to survive on its own and does not call for a lot of attention. Installation of laminate flooring differs a bit from the installation of hard wood. For example, when installing laminate flooring in the kitchen, you must check to see that the cabinets are fitted before hand and then you can find your way around them as you fix the planks of the laminate wood.
Remember that this wood is soft and it might break if you fix the cabinets after you have installed it. As for the hardwood, there is no preference for what comes first; either the cabinets or the flooring can come first.
To get the bets results when installing laminate flooring, you could work with a few tips;
1. Go for the best brands of the laminate flooring that are available in the market. These include Bruce, Alloc and Armstrong.
2. Understand the tongue and the groove system of fixing the floor. The tongue should be slipped into the groove and it will just snap into the right position.
3. Never hit the laminate wood with a hammer. As you buy the wood, ask for the special block that is designed for that purpose. Also ask for a floor membrane that takes out the unevenness out of the wood and also makes it sound proof.
4. Always leave some space between the pieces of wood. This gives room for expansion and contraction.
Similar Posts:
- Installing Laminate Flooring – Tips To Make Installation Easier
- The Easy Way To Install Laminate Flooring
- The Easy Way To Install Laminate Flooring
- Laminate Kitchen Cabinet Refacing
- Bring the Beauty Out of Your Kitchen With Laminate Kitchen Cabinets
Great tips!